ASME B16.9 A234 WPB Butt Weld Fittings Shipped for Singapore Piping Project
Haihao Group has finished packing and dispatched a mixed batch of butt weld fittings built to ASME B16.9 for a Singapore piping project. This full set of A234 WPB carbon steel fittings covers tees, elbows and concentric reducers, all seamless and prepared with sandblasting and magnetic particle testing before release.
The A234 WPB fittings include equal tee and reducing tee across multiple size combinations. The equal tee comes in NPS 4, S40/STD wall, while reducing tee sizes range from 8″×3″, 8″×4″, up to 14″×8″ and 20″×14″, with STD and S40 schedules as listed. These tees are widely used for branch take-offs on general process, water and utility lines where reliable carbon steel performance is required.

ASME B16.9 A234 WPB carbon steel butt weld fittings, tee, short radius elbow, concentric reducer, sandblasted finish
Our A234 WPB fittings also contain 45° long radius elbows and 90° short radius elbows. Sizes include 3″, 4″ and 8″, all S40/STD seamless construction. Short radius elbows are selected for tight layout spaces, while long radius 45° elbows help reduce flow turbulence. Completing the scope are concentric reducers in 3″×2″ and 4″×3″, used for smooth bore transition between different pipe diameters.
Every A234 WPB fitting in this shipment goes through two key surface and inspection steps. Sandblasting removes mill scale and surface contaminants, creating a clean base for painting or coating on site. Magnetic particle testing (MT) is carried out to screen surface and near-surface cracks, a standard NDT check that Singapore project inspectors often require for carbon steel pressure piping components.
We know buyers in Singapore and Southeast Asia often source a varied fitting package in one order, rather than separate small shipments from multiple vendors. Consolidating different tee, elbow and reducer sizes into a single consignment cuts logistics work and simplifies site receiving. All fittings are clearly marked with heat number, size, schedule, material grade and ASME B16.9 standard for full traceability.
A234 WPB remains one of the most practical carbon steel grades for non-sour moderate temperature piping. It balances formability, weldability and mechanical strength, and works well with standard butt weld installation. When you order A234 WPB fittings, we can match your required NDT scope, surface finish and document package to fit local project inspection checklists.
If you are reviewing RFQs for ASME B16.9 butt weld fittings, including tees, elbows and reducers with MT or other NDT requirements, share your size schedule and inspection sheet. Haihao Group can quote mixed sizes, arrange test witnessing and deliver certified fittings ready for Singapore and regional industrial piping projects.

