Some basic requirements of nuclear power plant pipeline technology
During the construction of a nuclear power plant,there are some basic requirements that need to be followed.We have gained a better understanding of these requirements through participating in Hainan Changjiang nuclear power phase II project.Let’s take a look at some of them.
First of all,as we mentioned before,cast iron valves cannot be used on the pipelines of nuclear power plants.In addition,there are some requirements for the bending radius of elbows,expansion joints and other components,which shall not be less than 3.5 times of the nominal outer diameter of the pipe.For the use of welded elbow,reducer and tee,the pressure is required to be less than 39kg/cm.As it is a high-temperature operation environment,compensation calculation is required for each pipe section of the fixed support,and compensators can be used.The compensators should be made of pipes of the same material and purpose,and the pressure is less than 16kg/cm.In Hainan Changjiang nuclear power II project,Hai Hao Group not only provided the main pipeline products,but also manufactured compensators according to the requirements,which are also put into use smoothly.
Because of the particularity of the nuclear power station project,there are many other detailed requirements,such as the inner diameter and weld requirements etc.,which will not be listed here.If you are interested,you can contact us and we will discuss together.As long as it is a question about pipe fittings,we are happy to answer it for you.